Hi zhuangjian -
Maybe someone else has tried this? I'm not sure you can boot
VxWorks in this way --at least not without some work on the image.
If bank A is not physically damaged, it may be easier to
re-flash the bootrom . This page has helped in the past,
assuming you have a known good bootrom.mv5100:
http://www.bio.aps.anl.gov/~dgore/beamline/EPICS/VME.html
Regards,
-Matt
zhuangjian wrote:
> hello,everyone
> I have a mv5100 board with some problem in flash bank A. So, I want to boot vxworks 5.4 from ppcbug directly without flush
> vxworks bootrom into flash. Now, I find some problem in memeory initialization progress. The program is flying.
> So, who can give me some suggestions?
>
> Best wishes
>
>
> --------------
> zhuangjian
> 2009-02-02
>
>
- Replies:
- Re: Re: boot vxworks from ppcbug in mv5100 zhuangjian
- References:
- boot vxworks from ppcbug in mv5100 zhuangjian
- Navigate by Date:
- Prev:
EPICS Codeathon 2009 at Brookhaven Andrew Johnson
- Next:
Re: Re: boot vxworks from ppcbug in mv5100 zhuangjian
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
boot vxworks from ppcbug in mv5100 zhuangjian
- Next:
Re: Re: boot vxworks from ppcbug in mv5100 zhuangjian
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|