Experimental Physics and
Industrial Control System

I get this message on the iocsh (base is 3.14.8.2):

dbCaTask ca_array_put Channel write request failed
OTERMPCGP:cmdRmp has DB CA link to OTERMPCGP:colStRmp.PROC

This is my record definition:

record(seq,"OTERMPCGP:cmdRmp") {
	field(DOL1,"1")
	field(LNK1,"OTERMPCGP:stRmp PP NMS")
	field(DOL2,"1")
	field(LNK2,"ERMPCGP:disableAll PP NMS")
	field(DOL3,"ERMPCGP:setNrg NPP NMS")
	field(LNK3,"ERMPCGP:rdRmp PP NMS")
	field(DOL4,"1")
	field(LNK4,"OTERMPCGP:startRmp.PROC PP NMS")
	field(DOL5,"1")
	field(LNK5,"OTERMPCGP:colStRmp.PROC CA NMS")
}

So... what's the problem?

Cheers
Ben

Replies:

Re: DB CA link to PROC field Benjamin Franksen

Re: DB CA link to PROC field Tim Mooney

Navigate by Date:

Prev: Re: [APS Beamline_controls] Access to IO registers from user-spacein recent Linux versions Till Straumann

Next: sub routine record doesn't get value via INPD Dr. Peter Zumbruch

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: POSIX signals in Epics Andrew Johnson

Next: Re: DB CA link to PROC field Benjamin Franksen

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024