RE: USB4000

[David Beauregard <David.Beauregard@lightsource.ca>]

Hi Qiao,

I have only used it on linux, but I think that Cygwin would also work if needed.

David

-----Original Message-----
From: Geng, Zheqiao [mailto:gengzq@slac.stanford.edu] 
Sent: February-14-11 5:22 PM
To: David Beauregard; Szalata, Zenon M.; tech-talk@aps.anl.gov
Subject: RE: USB4000

Hi David,

What platform does your driver work on? Does it work on Linux?

Best wishes,
Qiao

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Zheqiao Geng
SLAC National Accelerator Laboratory
2575 Sand Hill Road, Mail Stop 64, Menlo Park, CA 94025-7015, USA
phone:  +1(650)926-4262                               
e-mail: gengzq@slac.stanford.edu
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  


-----Original Message-----
From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of David Beauregard
Sent: Friday, February 11, 2011 9:49 AM
To: Szalata, Zenon M.; tech-talk@aps.anl.gov
Subject: RE: USB4000

Hi Zenon,

 

I have developed epics support for the OceanOptics spectrometers here at the CLS and it is being used by a couple other labs.  So far I have used it with the USB4000 and the QE65000.  I can send you the driver I have put together, but it makes use of the Omnidriver package and you will have to buy that from OceanOptics.  The latest version of this driver that I have uses the Omnidriver 1-5, have you already bought this?

 

David  

 

From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Szalata, Zenon M.
Sent: February-10-11 2:13 PM
To: tech-talk@aps.anl.gov
Subject: USB4000

 

Here at SLAC we are using the Ocean Optics USB 4000 Spectrometer device.  Presently we only have their application for controlling it.  The users are rather unhappy with it and are asking for EPICS application.

 

Has anyone developed an EPICS driver for this device?

If so, could it be made available?

 

Thanks in advance,

Zen