Hi, all;
I have a long series of bi record to process, which have an access to
a hardware register, say, every 5 seconds.
The number of records reaches a few to several thousands. In this case,
which one of the following two options is better or no essential
difference from performance point of view?
1)Chains all the records by using FLNK and process the first one every
5 second
2)Put them all into the “5 second” scan list
I recognize that measuring it is no big deal, but I’d like to ask the
experts first expecting one of you to point out something else to
consider, which I may be overlooking, other than performance issue.
Thanks a lot in advance.
J. Odagiri, High Energy Research Organization (KEK)
- Replies:
- Re: Forward Link v.s. Scan them all ? Eric Norum
- References:
- Xenomai Linux Dirk Zimoch
- Re: Xenomai Linux Andrew Johnson
- Re: Xenomai Linux Dirk Zimoch
- Navigate by Date:
- Prev:
RE: asyn driver on Windows XP Mark Rivers
- Next:
Re: Forward Link v.s. Scan them all ? Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Xenomai Linux Andrew Johnson
- Next:
Re: Forward Link v.s. Scan them all ? Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|