Hi Ulrik,
If you're familiar with the Keithley 2000 DMM support in the ip module of
synApps (http://www.aps.anl.gov/bcda/synApps/ip/ip.html) there is a modified
version that worked on the 6517A. It has a model check in the sequence
program that you will have to modify.
ipApp/Db/Keithley65xxEM.db
ipApp/src/Keityley65xxEM.st
ipApp/op/adl/Keithley65xxEM.adl (MEDM)
It uses asyn ports but has not been exercised for a few releases of synApps.
Database load:
# Keithley 6517A Electrometer
dbLoadRecords("$(IP)/ipApp/Db/Keithley65xxEM.db","P=xxx:,Dmm=EM1,PORT=serial14")
Sequencer Load:
# Keithley 6517A electrometer (10 chan)
seq &Keithley65xxEM,("P=xxx:, Dmm=EM1, channels=10, model=6517A")
Let me know if you have any questions.
Joe
--
Joseph Sullivan
[email protected] <> 630-252-8657
Advanced Photon Source
APS Engineering Services Division
Beamline Controls & Data Acquisition Group
[email protected] wrote:
Hi,
Anybody out there with EPICS support for the Keithley 6517B Electrometer/High Resistance Meter? Preferably asyn/streams based via RS232 or GPIB...
Cheers,
Ulrik
--------------------------------------------------------------------
Ulrik Pedersen phone: +44(0)1235-778580
Software Engineer email: [email protected]
Diamond Light Source Ltd
Diamond House
Harwell Science and Innovation Campus
Didcot
Oxfordshire
OX11 0DE
--------------------------------------------------------------------
- References:
- Keithley 6517B support? ulrik.pedersen
- Navigate by Date:
- Prev:
put to disabled records and monitors Dirk Zimoch
- Next:
Re: put to disabled records and monitors Tim Mooney
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Keithley 6517B support? ulrik.pedersen
- Next:
Location of caTools sources Shankar, Murali
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|