Re: sequencer installation

[Benjamin Franksen <benjamin.franksen@helmholtz-berlin.de>]

Hm, I had once successfully compiled it with 3.15. Let's see... yes 
2.1.12 states that in the release notes.

So, shareLib.h went away 3.15? That's new to me. Is there a replacement? 
How to upgrade while still maintaining 3.14 compatibility?

On Wednesday, June 04, 2014 20:09:06 Mark Rivers wrote:
> You are using EPICS 3.15.  Do you have a reason for using that?  It is
> still not ready for production systems.  Should you be using
> 3.14.12.4 instead?
> 
> Mark
> 
> ________________________________
> From: tech-talk-bounces@aps.anl.gov [tech-talk-bounces@aps.anl.gov] on
> behalf of Vikram Bhagat [vbhagat@rocketmail.com] Sent: Wednesday,
> June 04, 2014 3:02 PM
> To: epics talk
> Subject: sequencer installation
> 
> Hello,
>     I am trying to install sequencer but could not build
> Below is the log an anyone guide me what is wrong with installation.
> 
> 
> [root@sarva-PC sncseq]# make
> make -C ./configure install
> make[1]: Entering directory `/opt/epics/modules/sncseq/configure'
> make -C O.linux-x86_64 -f ../Makefile TOP=../.. T_A=linux-x86_64
> install make[2]: Entering directory
> `/opt/epics/modules/sncseq/configure/O.linux-x86_64' perl -CSD
> /opt/epics/base/bin/linux-x86_64/convertRelease.pl checkRelease
> make[2]: Leaving directory
> `/opt/epics/modules/sncseq/configure/O.linux-x86_64' make[1]: Leaving
> directory `/opt/epics/modules/sncseq/configure' make -C ./src install
> make[1]: Entering directory `/opt/epics/modules/sncseq/src'
> make -C ./pv install
> make[2]: Entering directory `/opt/epics/modules/sncseq/src/pv'
> make -C O.linux-x86_64 -f ../Makefile TOP=../../.. T_A=linux-x86_64
> install make[3]: Entering directory
> `/opt/epics/modules/sncseq/src/pv/O.linux-x86_64' make[3]: *** No
> rule to make target `/opt/epics/base-3.15.0.1/include/shareLib.h',
> needed by `pvNew.o'.  Stop. make[3]: Leaving directory
> `/opt/epics/modules/sncseq/src/pv/O.linux-x86_64' make[2]: ***
> [install.linux-x86_64] Error 2
> make[2]: Leaving directory `/opt/epics/modules/sncseq/src/pv'
> make[1]: *** [pv.install] Error 2
> make[1]: Leaving directory `/opt/epics/modules/sncseq/src'
> make: *** [src.install] Error 2
> [root@sarva-PC sncseq]#
> 
> 
> 
> I set
> EPICS_BASE=/opt/epics/base
> in configure/RELEASE
> 
> 
> Thanks
> Vikram

Attachment: signature.asc
Description: This is a digitally signed message part.