Re: sequencer installation

[Vikram Bhagat <vbhagat@rocketmail.com>]

Thank you Mark 

http://www-csr.bessy.de/control/SoftDist/sequencer/releases/

On Tuesday, June 24, 2014 9:29 PM, Mark Rivers <rivers@cars.uchicago.edu> wrote:

> It is also not available on http://www.aps.anl.gov/epics.

 

If you go to the EPICS 3.14 Web site:

http://www.aps.anl.gov/epics/base/R3-14/index.php

 

and look at the bottom of the page it does contain a link to the current SNL Compiler/Sequencer:

http://www-csr.bessy.de/control/SoftDist/sequencer/

 

Mark

 

 

From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Vikram Bhagat
Sent: Tuesday, June 24, 2014 2:23 PM
To: Ralph Lange; EPICS Tech-Talk
Subject: Re: sequencer installation

 

Hi Lange,

 Can you please indicate which version of sequencer is for 3.14.12.4?   The link  http://www.slac.stanford.edu/grp/cd/soft/epics/sequencer is not accessible.

 

 

Thanks

Vikram

 

On Sunday, June 22, 2014 11:52 AM, Ralph Lange <ralph.lange@gmx.de> wrote:

 

On 22/06/2014 09:01, Vikram Bhagat wrote:

I am trying with 

seq-2.0.11.tar.gz

That is an old version of the sequencer. Its download page [1] very clearly shows the version of base it works with, in this case 3.14.8
Maintainership of the sequencer module has moved. Please use a recent version of the sequencer, available on its current home [2], which will compile and work without problems with a recent version of base. The EPICS web site [3] also points to the current home of the sequencer.

Cheers,
~Ralph

ps. Could someone at SLAC please put a prominent "outdated" note on the old sequencer page, with a link pointing to its current home? Thank you!

[1] http://www.slac.stanford.edu/grp/cd/soft/epics/sequencer

[2] http://www-csr.bessy.de/control/SoftDist/sequencer
[3]

http://www.aps.anl.gov/epics/modules/soft.php