Hello,
LCLS Magnet Controls are upgrading a ps controller that is used to power low current magnets. The new ps controller
has onboard adc,dac, dio,fpga,evr, interrupts and a removable COMx cpu running LinuxRT.
So this ps controller will be an embedded EPICS IOC, running LinxuRT.
We are close to rolling new hardware out to production, but before that happens, we need to work on the infrastructure for linuxRT.
For instance:
1) remote reboot of EPICS processes running on linuxRT cpu, from EDM.
2) making sure the same process isn't started multiple time on the cpu as part of the reboot...so we don't have duplicate PVs.
3) killing a dead EPICS process on the linuxRT cpu,
4) cpu stats in EPICS
5) providing an easy way to change the DHCP config file and restart the DHCP sever for Operations.
In case , a ps controller needs to be replaced in the middle of night. There' s no static ip you can set in the nv ram like an mvme6100.
Before starting to develop our own solution, I wanted to ask if other have already done so , and hopefully we can benefit from your hard work.
Regards,
- Kristi
- Navigate by Date:
- Prev:
RE: asyn R4.26 Mark Rivers
- Next:
Re: asyn R4.26 Zenon Szalata
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: asyn R4.26 Benjamin Franksen
- Next:
sabbatical at NSLS II Dalesio, Leo
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|