Re: how NOT to update the record

[Tasaddaq Khan <tasaddaq@gmail.com>]

Hi Tim Mooney

The problem is still same and this does not solve the problem. Even with this value of record 'd' does not update.

Is there any other way to solve the problem in EPICS?

tasaddaq

On Thu, Jul 9, 2015 at 7:56 PM, Mooney, Tim M. <mooney@aps.anl.gov> wrote:

Hi Tasaddaq,

One way to do that is like this:

record (calcout, "c"){

field(SCAN, "1 second")

field(INPA, "c")

field(INPB,"b")

field(INPC,"1")

field(CALC,"d:=a+c;b")

field(OCAL,"d")
field(OOPT, "When Non-zero")

field(DOPT, "Use OCAL")
field(OUT,"d PP")

}

Tim Mooney (mooney@aps.anl.gov) (630)252-5417
Software Services Group (www.aps.anl.gov)
Advanced Photon Source, Argonne National Lab

---

From: Tasaddaq Khan [tasaddaq@gmail.com]
Sent: Thursday, July 09, 2015 2:11 AM
To: Mooney, Tim M.
Subject: Re: how NOT to update the record

Hi Tim

I changed my program and use the OOPT field in record c, but the result is same. It sets the value c=0 when b=0 and record d keeps the last value that is fine, but when I again put b=1, it starts from the starting point but not from the last value it keeps which I do not want. I want that my record d keeps the last value when b=0 and starts from this value when I again put the b=1.

record (bi,"b"){
field(FLNK, "c")

}

record (calcout, "c"){

field(SCAN, "1 second")

field(INPA, "c")

field(INPB,"b")

field(INPC,"1")

field(CALC,"B=1?A+C:0")

field(OOPT, "When Non-zero")

field(OUT,"d PP")

}

record(calcout, "d"){

field(INPA, "c")

field(INPB,"1")

field(CALC,"A+B^2")

}

regards,

tasaddaq

On Thu, Jul 9, 2015 at 3:48 AM, Mooney, Tim M. <mooney@aps.anl.gov> wrote:

Hi Tasaddaq,

You can use the OOPT field to specify when the output link should be executed.  c.OOPT="When Non-zero"

Tim Mooney (mooney@aps.anl.gov) (630)252-5417
Software Services Group (www.aps.anl.gov)
Advanced Photon Source, Argonne National Lab

---

From: tech-talk-bounces@aps.anl.gov [tech-talk-bounces@aps.anl.gov] on behalf of Tasaddaq Khan [tasaddaq@gmail.com]
Sent: Wednesday, July 08, 2015 1:59 PM
To: tech-talk@aps.anl.gov
Subject: how NOT to update the record

Dear all

I have three records, when the value in the record "b" is "1" the value in the record c is calculated and the record d is updated as well. Upto this the things are working fine. But I want one more thing that when the b=0, the value of record "c" should become the zero (that is happening) but it should not send the value zero to the record d means at b=0 record c should be updated but it should not update the record d. I want to keep the last value of record d so that when b=1 again then record d should start from the last value that it will hold. Please tell me how to do this?

record (bi,"b"){

field(FLNK, "c")

}

record (calcout, "c"){

field(SCAN, "1 second")

field(INPA, "c")

field(INPB,"b")

field(INPC,"1")

field(CALC,"B=1?A+C:0")

field(OUT,"d PP")

}

record(calcout, "d"){

field(INPA, "c")

field(INPB,"1")

field(CALC,"A+B")

}

regards,

Tasaddaq