Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <20192020  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <20192020 
<== Date ==> <== Thread ==>

Subject: GNU Screen or procServ on ARM?
From: John Dobbins via Tech-talk <tech-talk@aps.anl.gov>
To: "tech-talk@aps.anl.gov" <tech-talk@aps.anl.gov>
Date: Fri, 22 Feb 2019 01:09:09 +0000
All,

I am running an EPICS IOC on a microZed board running Petalinux.  Building EPICS went smoothly. Thank you for that.

I am wondering if anyone has GNU screen or procServ running on ARM? Or perhaps have some other means of handling connection to the IOC shell on such a device?

Thanks,

John Dobbins

Cornell Laboratory for Accelerator Sciences and Education
Cornell University

www.classe.cornell.edu



Replies:
Re: GNU Screen or procServ on ARM? Florian Feldbauer via Tech-talk

Navigate by Date:
Prev: Re: Pro-Dex Oregon Micro Systems EPICS hardware support Earl Green via Tech-talk
Next: FW: GNU Screen or procServ on ARM? michael.abbott--- via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <20192020 
Navigate by Thread:
Prev: Re: Question about rdb channel archive Florian Feldbauer via Tech-talk
Next: FW: GNU Screen or procServ on ARM? michael.abbott--- via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <20192020 
ANJ, 22 Feb 2019 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·