Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	EPICS connection with S7-1500 PLC
From:	Vishnu Patel via Tech-talk <tech-talk at aps.anl.gov>
To:	"Tech Talk (tech-talk at aps.anl.gov)" <Tech-talk at aps.anl.gov>
Date:	Mon, 9 Mar 2020 11:30:00 +0000

Dear All,

I would like to connect S7-1517 CPU with EPICS.

I used s7-EPICS device support. But it gives and error

s7nodaveConfigureIsoTcpPort("lcpcPLC", "10.20.80.211", 0, 2, 0)

Could not connect to PLC for port lcpcPLC: daveConnectPLC() failed with status code -1.

2020/03/09 16:52:22.430 lcpcPLC -1 autoConnect could not connect

May be PLC is refusing the connection.

Please help me to connect S7-1517 CPU.

Thank you.

Vishnu

Navigate by Date:: Prev: Re: Streams Support for Varian Dual Heinz Junkes via Tech-talk; Next: RE: Streams Support for Varian Dual Mark Rivers via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024
Navigate by Thread:: Prev: New ADCompVision release, ADUVC UVC camera driver Wlodek, Jakub via Tech-talk; Next: Load or reload databases after IOC initialization Abdalla Ahmad via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024

ANJ, 10 Mar 2020