Experimental Physics and
Industrial Control System

 

From: fandayu at tucsen.com

Date: 2020-07-06 17:09

To: Mark Rivers

CC: tech-talk at aps.anl.gov

Subject: Re: Re: Epics iocInit()

Hi Mark

     Firstly, thank you very much for you relpy.

Now I will answer your some question:

- It looks like this is Windows, correct?  

 Yes, this is Windows

-  What does the error message say in English?

 the error message mean:There was a problem that caused the program to stop working properly.Please close the program

- What versions of EPICS base and other modules (asyn, etc.)?

 EPICS base ver:base-7.0.3.1  asyn ver:asyn-R4-37  busy ver: busy-R1-7-2 std-R3-6 .... and so on

- It looks like tucsen.com makes cameras.  Is this an areaDetector IOC?

 YES our campany makes cameras, I'm a software engineer from tucsen.

• YES,this is areaDetector IOC We want to develop our camera on Epics software.

- What IOC application is it?  Is it one you wrote, or one you got from some EPICS module?

year I refer to ioc from Andor3

- Do you get any output in the IOC console before you get that error?  If the error is a missing DLL then you probably won't.

• I added the necessary DLL files,So I think it should not be caused by DLL

- If you do get output then please send the complete output.

• • It crashes when it runs and there's no output, right

  • sometimes I find if i 

    • Adding this function( createParam(TucsenPixelEncodingString,    asynParamInt32,   &TucsenPixelEncoding);

    • ) will cause the program to crash

    • In particular this enumeration(asynParamInt32

    • )

    • • Could I trouble you for help,thk

---

fandayu at tucsen.com

 

From: Mark Rivers

Date: 2020-07-04 22:10

To: fandayu at tucsen.com

CC: EPICS tech-talk

Subject: Re: Epics iocInit()

Hi,

 

 

There is way too little information in your message to answer your question.  Most of the people on tech-talk cannot read Chinese so we don't know what the error message says.  But even if we did we need to know a lot more.

 

 

- It looks like this is Windows, correct?

 

-  What does the error message say in English?

 

- What versions of EPICS base and other modules (asyn, etc.)?

 

- It looks like tucsen.com makes cameras.  Is this an areaDetector IOC?

 

- What IOC application is it?  Is it one you wrote, or one you got from some EPICS module?

 

- Do you get any output in the IOC console before you get that error?  If the error is a missing DLL then you probably won't.

 

- If you do get output then please send the complete output.

 

 

Mark

 

 

 

________________________________

From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of fandayu--- via Tech-talk <tech-talk at aps.anl.gov>

Sent: Friday, July 3, 2020 12:31 AM

To: tech-talk at aps.anl.gov

Subject: Epics iocInit()

 

hi

 

[cid:_Foxmail.1@ba3ab396-468b-e51a-e09a-1eb639df79e2]

 

The code crashes when it is iocInit() .Do you have any other good Suggestions

 

________________________________

fandayu at tucsen.com

References:

Epics iocInit() fandayu--- via Tech-talk

Re: Epics iocInit() Mark Rivers via Tech-talk

Re: Re: Epics iocInit() fandayu--- via Tech-talk

Navigate by Date:

Prev: Re: Re: Epics iocInit() fandayu--- via Tech-talk

Next: Re: GitHub Software Releases in support of EPICS Web Applications Ryan Slominski via Tech-talk

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  <2020>  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Re: Epics iocInit() fandayu--- via Tech-talk

Next: RE: Re: Epics iocInit() Mark Rivers via Tech-talk

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  <2020>  2021  2022  2023  2024