Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	ASLO doesn't work
From:	Vishnu Patel via Tech-talk <tech-talk at aps.anl.gov>
To:	"tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov>
Date:	Thu, 17 Sep 2020 09:10:28 +0000

Hi,

I have tried to divide the value of ai record using ASLO field. But It doesn't work.

record(ai, "AI0") {

field(DTYP,"s7nodave")

field(INP,"@lcpcPLC DB6.DBD36 float")

field(LINR,"LINEAR")

field(HOPR,"20")

field(LOPR,"0")

field(ASLO,"0.001")

field(PREC,"4")

field(SCAN,"1 second")

field(EGU,"Bar")

field(EGUF,"32767")

field(EGUL,"-32768")

}

my input is 1003.124 and it gives same only even i change ASLO to 1.

The PLC the value is 1003.124 in mBar, i have to display as 1.0031 Bar.

I am missing something to set.

Thanks

Vishnu

Replies:: Re: ASLO doesn't work Maren Purves via Tech-talk; Re: ASLO doesn't work Ralph Lange via Tech-talk; Re: ASLO doesn't work Ben Franksen via Tech-talk; Re: ASLO doesn't work 李刚 via Tech-talk

Navigate by Date:: Prev: device support for IK342 Sintschuk, Michael via Tech-talk; Next: Re: ASLO doesn't work Maren Purves via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024
Navigate by Thread:: Prev: AW: device support for IK342 Sintschuk, Michael via Tech-talk; Next: Re: ASLO doesn't work Maren Purves via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024

ANJ, 18 Sep 2020