Experimental Physics and
Industrial Control System

"Feister, Scott via Tech-talk" <tech-talk at aps.anl.gov> · Wed, 21 Jul 2021 22:29:11 +0000

Hi Lewis and Ernesto,

Thank you both for the advice! I appreciate your support and will try out both approaches.

Best,

Scott

-----Original Message-----
From: J. Lewis Muir <jlmuir at imca-cat.org> 
Sent: Tuesday, July 20, 2021 7:24 PM
To: Feister, Scott <scott.feister at csuci.edu>
Cc: tech-talk at aps.anl.gov
Subject: Re: Best practices for booting IOC at Linux startup?

CAUTION: This email originated from outside of CSUCI. Do not click links or open attachments unless you validate the sender and know the content is safe. Contact ITS if you have any concerns

On 07/20, Feister, Scott via Tech-talk wrote:
> Can anyone share some best practices on having an IOC boot whenever Linux boots? I'm trying to make it as easy as possible to reboot the instrument, by simply power cycling. The hardware is a Raspberry Pi whose sole purpose is to boot and run its IOC every time it powers on. Thanks!

I run my soft IOCs in tmux started as a service.

Lewis

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System