RE: EPICS support for the Omega Platinum Series PID Controllers

["Sobhani, Bayan via Tech-talk" <tech-talk@aps.anl.gov>]

I am guessing the Omega Pt series communication is different from the Omega I series? Here is an internal link to the protocol file for the Omega I series IOC if you have not already seen it:

 

https://gitlab.nsls2.bnl.gov/EPS/omega_i_series/blob/master/protocols/omega-CNi32.proto

 

This should tell you whether or not they are similar.

 

Alex

 

 

From: Tech-talk <tech-talk-bounces@aps.anl.gov> On Behalf Of Saleh, Ibrahim via Tech-talk
Sent: Tuesday, November 9, 2021 12:04 PM
To: Wlodek, Jakub <jwlodek@bnl.gov>; tech-talk@aps.anl.gov
Subject: RE: EPICS support for the Omega Platinum Series PID Controllers

 

Hello Jakob,

 

We use CNI3253-C24-DC for rack temperature control applications. We use simple StreamDevice commands to read temperature and write setpoints based on the following manual: omega_CNi16_communications.pdf (lbl.gov). Let me know if you want further information.

 

Regards,

Ibrahim

 

From: Tech-talk <tech-talk-bounces@aps.anl.gov> On Behalf Of Wlodek, Jakub via Tech-talk
Sent: Monday, November 8, 2021 4:57 PM
To: tech-talk@aps.anl.gov
Subject: EPICS support for the Omega Platinum Series PID Controllers

 

Hello all,

 

Before I begin making plans to develop a new driver for this purpose, has anyone developed EPICS support for the Omega Platinum Series of PID controllers?

 

The specific model I am thinking of is the CN8PT-445, however, based on my preliminary research it seems that the communication protocols are shared between the models in the Platinum line:

https://bl831.als.lbl.gov/~gmeigs/PDF/CN8_serial_comm.pdf

 

If anyone has had a chance to work with one of these and develop an EPICS driver for it, please let me know!

 

Thanks,

Jakub