Hello! I installed mrfioc2 2.3.0 on MTCA platform. According to EVR Usage Guide, when I do the timestamp test, there are two problems: a. The system is configured with NTP, but the current time provider does not have NTP [opi@localhost ~]$ ntpstat
synchronised to NTP server (202.38.64.7) at stratum 3
time correct to within 11 ms
polling server every 512 s b. The time interval between the system clock and the EVR time is large. epics> generalTimeReport(2)
Backwards time errors prevented 446106 times.
Current Time Providers:
"EVR", priority = 50
Current Time is 2022-03-07 16:34:25.575015.
"OS Clock", priority = 999
Current Time is 2022-03-07 16:36:55.978638.
Event Time Providers:
"EVR", priority = 50
Thank you for your time. I am looking forward to your reply.
- Replies:
- Re: Timestamp test questions on Linux Michael Davidsaver via Tech-talk
- Navigate by Date:
- Prev:
Re: Develop motor drivers using controller's DLL Laurenz Rettig via Tech-talk
- Next:
回复: StreamDevice liuxiaomin via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
<2022>
2023
2024
- Navigate by Thread:
- Prev:
Re: Building EDM on Rocky Linux Michael Davidsaver via Tech-talk
- Next:
Re: Timestamp test questions on Linux Michael Davidsaver via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
<2022>
2023
2024
|