Dear MRF driver experts,
I am doing some test with the quite new card (1 year), mTCA-EVRTM-300. For those who don’t know it this is an universal output extender for the MTCA-EVR-300 or even apparently for the MTCA-EVM-300.
First, is someone tried and managed to use the card with the mrfioc2 driver ?
For now I’m just testing it with the EVR and I have some problem.
My issue :
I have added a substitutions files with
only:
file
"mrmevrout.db"
{pattern
{ON,
ONSRC,
OBJ,
DESC}
{"$(SYS)-$(D):OutRB0-",
"$(SYS)-$(D):OutRB0-Src-",
"$(EVR):RearUniv0",
"Rear 0"}
{"$(SYS)-$(D):OutRB1-",
"$(SYS)-$(D):OutRB1-Src-",
"$(EVR):RearUniv1",
"Rear 1"}
{"$(SYS)-$(D):OutRB2-",
"$(SYS)-$(D):OutRB2-Src-",
"$(EVR):RearUniv2",
"Rear 2"}
Etc …
My startup file
mrmEvrSetupPCI("EVR-MTCA5",
"$(EVR_PCI5)")
and
dbLoadRecords("evr-mtca-300u.db","SYS=$(SYS),D=$(EVR),
EVR=EVR-MTCA5 , PINITSEQ=$(EVR),FRF=$(FREQ),FEVT=$(FREQ)")
dbLoadRecords("evr-mtca-rtm-300.db","SYS=$(SYS),D=$(EVR),
EVR=EVR-MTCA5 ")
The evr-mtca-300u works well, but for the
rearUniv I have the following messages :
LABO-MPS-SBCT:TIM-EVR-1:OutRB0-Ena-SP: failed to find/create object 'EVR-MTCA5:RearUniv0' : Object not found : EVR-MTCA5:RearUniv0
LABO-MPS-SBCT:TIM-EVR-1:OutRB1-Ena-SP: failed to find/create object 'EVR-MTCA5:RearUniv1' : Object not found : EVR-MTCA5:RearUniv1
I have checked the register and Jukka confirmed me that we have to use the
TBOutput register and RearUniv in the driver seem to correspond.
Have I missed something ?
Thanks in advance
Alexis GAGET
CEA Saclay - DRF/Irfu/DIS/LDISC
Bâtiment 472 - pièce 105
alexis.gaget at cea.fr
01 69 08 95 17