Re: Newport controller ESP302

[Mark Rivers via Tech-talk <tech-talk@aps.anl.gov>]

There are no example IOCs for the ESP302 in motorNewport. 

Here is an iocBoot directory for an ESP300, which uses serial, not Ethernet. You should be able to replace drvAsynSerialPortConfigure with drvAsynIPPortConfigure. You need to use port 5001. 
https://github.com/CARS-UChicago/GSECARS-EPICS/tree/master/iocBoot/ioc13esp_test

I think the commands for the ESP302 should be the same as the ESP300.

Mark

Sent from my iPhone

On Oct 25, 2022, at 9:24 PM, Jong Woo Kim <Jong.Woo.Kim@asu.edu> wrote:



Dear Mark, 

Which one is the right startup IOC file for it? 

https://github.com/epics-motor/motorNewport/tree/master/iocs/newportIOC/iocBoot/iocNewport

Best,

Jong

---

From: Mark Rivers <rivers@cars.uchicago.edu>
Sent: Tuesday, October 25, 2022 6:43 PM
To: Jong Woo Kim <Jong.Woo.Kim@asu.edu>
Cc: tech-talk@aps.anl.gov <tech-talk@aps.anl.gov>
Subject: Re: Newport controller ESP302

 

I have used it and made improvements to the driver.

What would you like to know?

Mark

Sent from my iPhone

On Oct 25, 2022, at 7:47 PM, Jong Woo Kim via Tech-talk <tech-talk@aps.anl.gov> wrote:



Hello! 

Is there anybody who has experience with Newport ESP302 (TCP/IP) and EPICS IOC? 

Best,

Jong