Hello,
I’m trying to serial communication MVME6100 and set up this board to booting well.
So when I’m trying to start putty and this MVME6100 board booting very nice.
First step booting->
CPU:Motorola MVME6100-0173 – MPC 7457
Version: VxWorks5.5.1
BSP version: 1.2/5
Creation date: Nov 4 2008, 16:13:29
Press any key to stop auto-boot …
6
[VxWorks Boot]: c
Boot device : geisc
Unit number : 0
Processor number: 0
Host name: host
File name : vxworks file path (/home/test/work/vxconfig/default/vxWorks)
Inet on ethernet : cpu board ip:subnetmask (10.4.49.67:ffffff00)
Host inet : server ip
User : test
ftp password : test
Flags : 0x0
Startup script : epics motor module st.cmd file path (/home/test/epics/synApps_6_1/support/motor-R7-1/modules/motorOms/iocs/omsIOC/iocBoot/iocOms/st.cmd
And then press enter key, It shows me error like this
WARNING:Bootline longer than BOOT_LINE_SIZE (255 bytes). Not saved to NVRAM.
I can see my setting value is like this,
[VxWorks Boot]: p
Boot device : geisc
Unit number : 0
Processor number: 0
Host name: host
File name : vxworks file path => (??????????????????/home/test/w?o?rk/vxc??onf??ig/default/v???????xWorks)
Inet on ethernet : cpu board ip:subnetmask =>(??????10.4.49.67:ffffff00)
Host inet : server ip
User : test => ????test
ftp password : test
Flags : 0x0
Startup script : epics motor module st.cmd file path =>(/home/test/epics/synApps_6_1/support/motor-R7-1/modules/motorOms/iocs/omsIOC/iocBoot/iocOms/st.cmd
Do you guys have any solutions to resolve this problem? I really need help.
Thank you.