Experimental Physics and
Industrial Control System

HI, I’d like to ask how to connect CSS with vxworks

I currently booting vxWorks and run EPICS IOC by st.cmd and MAXv.cmd.

It works like this:

ld 0,0, "oms.munch"

value = 0 = 0x0

cd top

value = 0 = 0x0

dbLoadDatabase "dbd/oms.dbd"

value = 0 = 0x0

oms_registerRecordDeviceDriver pdbbase

value = 0 = 0x0

dbLoadRecords("$(MOTOR)/db/motorUtil.db", "P=oms:")

value = 0 = 0x0

< MAXv.cmd

dbLoadTemplate(“MAXv.subtitutions”)

value = 0 = 0x0

MAXvSetup(1, 16, 0xF000, 200, 5, 10)

str=malloc(200);

strcpy str, “AA; LMH,H,H,H,H,H,H,H;”

strcat str, “AX LTH PSO; AY LTH PSO; AZ LTL PSO; AT LTL PSO; AU LTL PSO; AV LTL PSO; AR LTL PSO; AS LTL PSO;”

MAXvConfig(0,str,0,0)

value = 0 = 0x0

free(Str)

value = 0 = 0x0

iocInit

Starting iocInit

############################################################################

## EPICS R3.15.6

## EPICS Base built Oct  7 2022

############################################################################

iocRun: All initialization complete

value = 0 = 0x0

motorUtilInit("oms:")

value = 0 = 0x0

# Boot complete

Done executing startup script 'host:/home/test/epics/synApps_6_1/support/motor-R7-1/modules/motorOms/iocs/omsIOC/iocBoot/iocOms/st.cmd'.

I downloaded css and start make new project(opi).

And then I give a pv(oms:m1) to this new opi project for connect vxworks maxv controller’s omsMotor.

This is my css:

But it shows me disconnected when I start opi like this:

Does anyone knows how to connect css pv with motoroms(vxworks)?

Or do I have to set css?

thanks