Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	dbpf to waveform
From:	Hinko Kocevar <[email protected]>
To:	"[email protected]" <[email protected]>
Date:	Thu, 28 Jun 2018 12:12:02 +0000

Hi,

at the moment I can use dbpf to write array of char values (ASCII) to waveform.

epics> dbpf FEB-030Row:PBI-EVR-030:SoftSeq0-EvtCode-SP dodo

DBR_UCHAR[5]: 100 0x64 111 0x6f

100 0x64 111 0x6f

0 0x0

OTOH, if I want to write '42', as an integer, to index 0 of waveform I do not get expected results.

epics> dbpf FEB-030Row:PBI-EVR-030:SoftSeq0-EvtCode-SP 42

DBR_UCHAR[3]: 52 0x34 50 0x32

0 0x0

Any way to get 42 into the waveform with current iocsh facilities?

Thanks,
Hinko

Navigate by Date:: Prev: Re: 'assert (pca->pgetNative)' failed in ../dbCa.c Andrew Johnson; Next: Re: dbpf to waveform Johnson, Andrew N.; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: areaDetector R3-3 released Mark Rivers; Next: Re: dbpf to waveform Johnson, Andrew N.; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024

ANJ, 28 Jun 2018