RE: EPICS Support for NI-9223

[Abdalla Ahmad via Tech-talk <tech-talk at aps.anl.gov>]

CC Tech-Talk

 

Best Regards,

Abdalla Al-Dalleh

Control Engineer

SESAME

 

From: Abdalla Ahmad
Sent: Thursday, May 15, 2025 10:08 AM
To: Freddie Akeroyd - STFC UKRI <freddie.akeroyd at stfc.ac.uk>
Subject: RE: EPICS Support for NI-9223

 

Hi Freddie

 

Thanks for the link, I am not familiar with NI ecosystem so I have few questions:

1. Any prerequisites for building this support?
2. In this downloads page https://www.ni.com/en/support/downloads/drivers/download.ni-daq-mx.html#565431 there is a section for Linux downloads, does this download provides an API that I can use to build an EPICS driver on Linux or is it Just a LabVIEW instrument driver?

 

Thanks!

 

Best Regards,

Abdalla Al-Dalleh

Control Engineer

SESAME

 

From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Freddie Akeroyd - STFC UKRI via Tech-talk
Sent: Tuesday, May 13, 2025 4:39 PM
To: EPICS Tech Talk <tech-talk at aps.anl.gov>
Subject: RE: EPICS Support for NI-9223

 

Hi Abdalla,

 

We made a fork of the original EPICS DAQmxBase software and adapted it for DAQmx on Windows – the code is at https://github.com/ISISComputingGroup/EPICS-DAQmxBase

 

 

Regards,

 

Freddie

 

 

 

From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Ralph Lange via Tech-talk
Sent: 13 May 2025 09:45
To: EPICS Tech Talk <tech-talk at aps.anl.gov>
Subject: Re: EPICS Support for NI-9223

 

On Tue, 13 May 2025 at 09:58, Abdalla Ahmad via Tech-talk <tech-talk at aps.anl.gov> wrote:

 

I noticed on the NI section of EPICS manufacturers page https://epics.anl.gov/modules/manufacturer.php#National%20Instruments there is an EPICS driver for the NI-DAQmx interface which, according to NI website, works with the NI-9223 but the SVN URL ( http://epics.svn.sourceforge.net/viewvc/epics/applications/trunk/DAQmxBase/ ) is not working. Is there another URL to clone the driver? Will this driver work with the NI-9223? Are there other alternatives?

 

FWIW, the modules database has moved to https://epics-controls.org/resources-and-support/modules/ a few years ago.

 

Note that DAQmx and DAQmx Base are two different NI software products. DAQmx Base development was frozen by NI in 2019 (last release: 2015).

 

ITER has plain EPICS support and an NDSv3 device driver for the IRIO library (by the I2A2 institute of UPM - University of Madrid) on top of the NI DAQmx open source driver (yet another NI driver). [1]

The first official release of the IRIO-based stack was also announced on Tech-Talk [2] and later reported in the EPICS Collaboration Meeting in June 2019. [3]

 

NDSv3 is the C++ framework for data acquisition that ITER proposes for its diagnostics use cases. It was presented in more detail at the ICALEPCS 2021. [4]

We're currently in the middle of the procedure to make the ITER developments for NDSv3 public. Once we have the authorization, things will appear on GitHub.

 

Cheers,
~Ralph

 

[1] https://www.upm.es/recursosidi/en/offers-resources/technological-solutions/irio-intelligent-instrumentation-for-adaptative-integration/

[2] https://epics.anl.gov/tech-talk/2017/msg00083.php

[3] https://indico.global/event/7046/contributions/66556/

[4] https://inspirehep.net/literature/2076620