Support for Gamma Vacuum MPCq ion pump controller over Ethernet

[Mark Rivers via Tech-talk <tech-talk at aps.anl.gov>]

Folks,

I have been using this old C device support to talk to Gamma Vacuum MPC ion pump controllers.

 

https://github.com/epics-modules/ip/blob/master/ipApp/src/devMPC.c

https://github.com/epics-modules/ip/blob/master/ipApp/Db/MPC.db

This only talks via RS-232, but many of their newer modules support Ethernet.  The Ethernet message format is somewhat different.  Has anyone written StreamDevice support for the Ethernet protocol?

Thanks

Mark