We've downloaded and installed lanGpibSupport-2.4.b.tar.gz. The package
built and installed with no problems. We are now able to communicate
with several different GPIB devices here using the HP2050 GPIB/LAN
gateway.
We have a problem, though. We'd like to use the HP2050 to control an
HPE1406A GPIB VXI controller. This controller is an extended
talker/listener and thus requires a secondary address before it will
communicate. How can this be done?
My guess is that there needs to be a change to the:
sprintf(devName, "%s,%d", hpGatewayName, gpibAddr);
in hpCreateDevLink, but I don't know what the change would be.
I also am unclear how the secondary GPIB address would be specified in
the EPICS database.
Any suggestions would be greatly appreciated.
Thanks,
--
Eric Norum [email protected]
Canadian Light Source Phone: (306) 966-6308
University of Saskatchewan FAX: (306) 966-6058
Saskatoon, Canada.
- References:
- Backward compatibility problems in LanGPIB Version 2.4 Benjamin Franksen
- Navigate by Date:
- Prev:
aao-aai at JLAB for RF George Lahti
- Next:
CA and arrays Brian McAllister
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Backward compatibility problems in LanGPIB Version 2.4 Benjamin Franksen
- Next:
Summary of ethernet switch discussion john sinclair
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|