Experimental Physics and
Industrial Control System

Mark Rivers via Tech-talk <tech-talk at aps.anl.gov> · Thu, 6 May 2021 18:05:13 +0000

> But fsControl is also SCAN=Passive in the example. For the FLNK or the INP CP to work, something must trigger fsControl to process.

Randall's original message said:

> If I put to fsControl, it sets but nothing happens.

So my understanding is that he was doing a caput to fsControl, but the FLNK was not processing fsCalc, as it should have.

Mark

________________________________
From: Hartman, Steven <hartmansm at ornl.gov>
Sent: Thursday, May 6, 2021 12:57 PM
To: Mark Rivers
Cc: Arnold, Ned D.; Randall Cayford; tech-talk at aps.anl.gov
Subject: Re: [EXTERNAL] calcout record processing

On May 6, 2021, at 1:52 PM, Mark Rivers via Tech-talk <tech-talk at aps.anl.gov<mailto:tech-talk at aps.anl.gov>> wrote:

He did FLNK from fsControl to fsCalc.  If that FLNK is not actually processing fsCalc than I think it may be because of the DTYP/INP mismatch.

But fsControl is also SCAN=Passive in the example. For the FLNK or the INP CP to work, something must trigger fsControl to process.

--
Steven Hartman
hartmansm at ornl.gov<mailto:hartmansm at ornl.gov>

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System