Experimental Physics and
Industrial Control System

Randall Cayford via Tech-talk <tech-talk at aps.anl.gov> · Thu, 6 May 2021 11:36:19 -0700

Removing the DTYP field from fsControl fixed it.  Thank you all for the help!

> On May 6, 2021, at 11:05 AM, Mark Rivers <rivers at cars.uchicago.edu> wrote:
> 
>> But fsControl is also SCAN=Passive in the example. For the FLNK or the INP CP to work, something must trigger fsControl to process.
> 
> Randall's original message said:
> 
>> If I put to fsControl, it sets but nothing happens.
> 
> So my understanding is that he was doing a caput to fsControl, but the FLNK was not processing fsCalc, as it should have.
> 
> Mark
> 
> ________________________________
> From: Hartman, Steven <hartmansm at ornl.gov>
> Sent: Thursday, May 6, 2021 12:57 PM
> To: Mark Rivers
> Cc: Arnold, Ned D.; Randall Cayford; tech-talk at aps.anl.gov
> Subject: Re: [EXTERNAL] calcout record processing
> 
> 
> 
> On May 6, 2021, at 1:52 PM, Mark Rivers via Tech-talk <tech-talk at aps.anl.gov<mailto:tech-talk at aps.anl.gov>> wrote:
> 
> He did FLNK from fsControl to fsCalc.  If that FLNK is not actually processing fsCalc than I think it may be because of the DTYP/INP mismatch.
> 
> 
> But fsControl is also SCAN=Passive in the example. For the FLNK or the INP CP to work, something must trigger fsControl to process.
> 
> --
> Steven Hartman
> hartmansm at ornl.gov<mailto:hartmansm at ornl.gov>
> 
> 
> 

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System